Author Topic: Sunfire True Sub - Help Fixing Auto On  (Read 16522 times)

OldiesButGoodies

  • Guest
Sunfire True Sub - Help Fixing Auto On
« on: September 23, 2012, 10:51:54 PM »
I am slowly removing imperfections from the Sunfire True Sub Mark IV sub.  The recent output cap replacements were a huge improvement - the hum appears to be gone and it sounds cleaner and tighter.  The next frontier is the auto-on circuit.  It takes a while for this cube to detect there is music playing and kick in.  I have to significantly pump up the volume in the pre or go fiddle with the potentiometer in the plate amp so it wakes up (the latter erases the level setpoint,  so it is a bit of  pain).   Any ideas on how to troubleshoot this? 

Thanks,

OBG


Offline Reverend

  • Ready For Intervention!
  • ******
  • Posts: 2162
  • Karma: +0/-0
Re: Sunfire True Sub - Help Fixing Auto On
« Reply #1 on: September 24, 2012, 08:33:03 AM »
Any ideas on how to troubleshoot this?

Yeah, give it to Tom and Anders to fix.   8)

OldiesButGoodies

  • Guest
Re: Sunfire True Sub - Help Fixing Auto On
« Reply #2 on: September 24, 2012, 09:13:28 AM »
Where is the fun in that?

Offline thuffman03

  • Zen Master
  • *****
  • Posts: 1097
  • Karma: +0/-0
  • CarverFest Evictee
Re: Sunfire True Sub - Help Fixing Auto On
« Reply #3 on: September 24, 2012, 09:35:30 AM »
Get rid of the POS sub and get a real sub.  Like a JL Fathom.   :laugh:
Got Carver?

OldiesButGoodies

  • Guest
Re: Sunfire True Sub - Help Fixing Auto On
« Reply #4 on: September 24, 2012, 10:04:59 AM »
OMG,  did Huff just say what he wrote?  The pope may excommunicate him!

Offline thuffman03

  • Zen Master
  • *****
  • Posts: 1097
  • Karma: +0/-0
  • CarverFest Evictee
Re: Sunfire True Sub - Help Fixing Auto On
« Reply #5 on: September 24, 2012, 01:07:34 PM »
OMG,  did Huff just say what he wrote?  The pope may excommunicate him!

All I know is if I did not already have two Sunfire True Subs, I would own a JL Fathom.  Tom had one in his shop and it kicked @ss!
Got Carver?

OldiesButGoodies

  • Guest
Re: Sunfire True Sub - Help Fixing Auto On
« Reply #6 on: September 24, 2012, 01:38:32 PM »
I remember that sub - went to the Carver boys in FL in exchange for a - maybe a Sunfire Tube Pre?  It was amazing what it could do - I remember listening to Laurie Mayer's Black Lining on it.  Incredibly solid bass. 

Maybe some day when I grow up I will get one.  For now I just want to get the Sunfire to wake up when I need it to.

Anders

  • Guest
Re: Sunfire True Sub - Help Fixing Auto On
« Reply #7 on: September 24, 2012, 05:41:17 PM »
Maybe it just needs to be kicked in the right place ;)
Or maybe a percussive re-alignment.

Offline Kingman

  • Southern Commander
  • *****
  • Posts: 3127
  • Karma: +0/-0
  • OCCD...I GOT IT BADD!!!!!!!!!
Re: Sunfire True Sub - Help Fixing Auto On
« Reply #8 on: September 26, 2012, 06:33:52 PM »
Get rid of the POS sub and get a real sub.  Like a JL Fathom.   :laugh:
...Tom's right in one respect...the Sunfires shake themselves to death. Currently have 4 and all but 1 are in need of service or will need it soon. Got a plate amp at VHF right now. The Fathom is a little pricy though. I heard the Epic subs do a great job at a reasonable price but that's just cross talk on the forums.
IN REALITY IT ONLY MATTERS WHAT IT SOUNDS LIKE TO YOU!!!!!

Offline OCCD

  • Woof
  • Ready For Intervention!
  • ******
  • Posts: 1741
  • Karma: +0/-0
  • glub glub glub
    • Vintage HiFi of Pittsburgh
Re: Sunfire True Sub - Help Fixing Auto On
« Reply #9 on: September 27, 2012, 04:14:32 PM »
Anders and I know what the problem is... 8)
Do you want ants? Because THAT'S HOW YOU GET ANTS!

OldiesButGoodies

  • Guest
Re: Sunfire True Sub - Help Fixing Auto On
« Reply #10 on: September 27, 2012, 09:16:30 PM »
Actually,  after auditioning this sub in PR I would buy this before the Fathom (in terms of value it is a better deal):

http://www.hsuresearch.com/products/vtf-15h.html

And a tip for slowing down walking sunfire subs:  plop a stack of granite samples on top with blue tack in between layers,  make him do heavy squats if he wants to walk.

I am pondering separating the plate amp from the box and putting it in an external chassis,  away from the jumping bean.  Would need to have a blank plate machined in 1/8 stainless steel,  would probably be expensive and only make a minimal difference,  but it does sound like a fun project. 

I am waiting for Anders et al to share their take on how to tame auto on.  I am thinking an infrared detector that senses when I am in the room and turns it on a set minimum time using a 555 circuit or better yet, until I tell it to revert to off.  That or Anders could tell me what magic condenser or resistor or rheostat or peaking coil controls the sensitivity.  That is what a brother would do.

 ;D

« Last Edit: September 27, 2012, 09:19:04 PM by OldiesButGoodies »

Offline Reverend

  • Ready For Intervention!
  • ******
  • Posts: 2162
  • Karma: +0/-0
Re: Sunfire True Sub - Help Fixing Auto On
« Reply #11 on: September 27, 2012, 09:23:55 PM »
And a tip for slowing down walking sunfire subs:  plop a stack of granite samples on top with blue tack in between layers,  make him do heavy squats if he wants to walk.

F that.  Go to Dick's and pickup a pack of hockey pucks.  Problem solved.

Anders

  • Guest
Re: Sunfire True Sub - Help Fixing Auto On
« Reply #12 on: September 28, 2012, 01:27:29 AM »
Maybe the flux capacitor isn't fluxing properly  :laugh:

Offline MacGeek

  • Ready For Intervention!
  • ******
  • Posts: 1464
  • Karma: +1/-0
Re: Sunfire True Sub - Help Fixing Auto On
« Reply #13 on: September 28, 2012, 04:22:38 AM »
Why not by pass the auto on , hard wire the sub to always be on (or install an on/off switch) and plug it into a current sensing outlet.  Or, some pre-amps have switched rear panel outlets.
Mac stuff, Sony HDR-F1HD AM/FM/HD tuner, Denon DRS 810 cassette, Denon CDR-W1500 CD recorder, Music Hall MMF-9 w/B&O MMC2, B & O 4002 w/B & O 20 CL, Revox A-77

OldiesButGoodies

  • Guest
Re: Sunfire True Sub - Help Fixing Auto On
« Reply #14 on: September 28, 2012, 09:47:48 AM »
Macgeek,  that is a brilliant suggestion. 

But I did find this piece of info in the interwebs:

Quote
...the auto on-off time is set by a single resistor-capacitor combination. R40 and C18. These are 5.2 megohms and 22uF. You will find these at the bottom-left corner of the quad jfet opamp U2 (MC34004). The 22uF cap looks to be a higher quality that all the other electrolytics.

Time to open that baby up again!

:P :P :P :P :P


PS: On a related note,  I may drop by ater to pick up a 22uf cap.  Love ya!
« Last Edit: September 28, 2012, 09:58:12 AM by OldiesButGoodies »