Author Topic: Bottlehead Eros  (Read 6184 times)

Offline Rockman Rock

  • Double Secret Probation!
  • **
  • Posts: 74
  • Karma: +0/-0
  • How about a taxi grab.....
Bottlehead Eros
« on: June 29, 2015, 12:31:09 AM »
Months back a friend brought his Bottlehead Reduction phono preamp with Integration upgrade over. I really liked the sound, so I was going to build one. Carl even heard it when he was here for Axpona. 

Aaron said get the Eros and we can compare them. So I did. In the next few weeks we'll hook up and do the compare. Mine is a stock build but they do supply some nice parts with the Eros. The Eros (50dB gain) is like $200 more then the Reduction/Integration upgrade (40dB gain). It sports two EF86 tubes used in microphones for first gain stage, a 6DJ8/6922/7308 output tube and one 12BH7 voltage regulator.

Ah, nothing like a cluttered bench, a hot iron and the smell of Cardas Quad Eutectic solder! Paint used on top plate is Rust-Oleum gloss enamel.





I either like burn in or I had some trouble on start up..



I have a LOMC (AT33PTG/II, .3mV). I use my diy two speed Cinemag SUT to boost the gain. Low speed has ~26dB of gain so I end up with 76dB total. I like a min of 70dB with LOMC carts. It sounds pretty good right off the bench!. Once I get some time on it, I'll stick some nicer tubes in it than the supplied ones. I also need to work on my wood working skills..... :-[
 




« Last Edit: June 29, 2015, 12:37:17 AM by Rockman Rock »
Salk SoundScape 8's / Audio Research Reference 3 / Bottlehead Eros Phono / Krell KSA-250 / diy Lenco w/AA MG-1 arm / diy Dual Mono Buffalo III DAC / Denon 3910 I2S/DSD out mod / SB Touch 12S out mod / diy Cinemag SUT

Offline schwarcw

  • Ready For Intervention!
  • ******
  • Posts: 1625
  • Karma: +0/-0
  • No one here gets out alive!
Re: Bottlehead Eros
« Reply #1 on: June 30, 2015, 12:07:46 AM »
Looking good Rockman! 

First class DIY workmanship.  Aaron's Bottlehead sounded fantastic.  I'm guessing this will take it up a notch.  I think Bearjew was contemplating a DIY phono stage.  He should consider this one. 

Melody Gardot is crooning you!

I see that wood case could also be used for kindling LOL!
Carl

Offline Rockman Rock

  • Double Secret Probation!
  • **
  • Posts: 74
  • Karma: +0/-0
  • How about a taxi grab.....
Re: Bottlehead Eros
« Reply #2 on: July 04, 2015, 12:41:39 AM »
Thanks Carl! How's this for a base? Pic of my crotch..........................walnut. Just one coat of Tung oil. My woodworking friend Aaron fooled me. He said it was Tongue oil, go to a tattoo parlor for it... ???

Salk SoundScape 8's / Audio Research Reference 3 / Bottlehead Eros Phono / Krell KSA-250 / diy Lenco w/AA MG-1 arm / diy Dual Mono Buffalo III DAC / Denon 3910 I2S/DSD out mod / SB Touch 12S out mod / diy Cinemag SUT

Offline Resident

  • Double Secret Probation!
  • **
  • Posts: 169
  • Karma: +0/-0
Re: Bottlehead Eros
« Reply #3 on: July 04, 2015, 07:34:31 AM »
Now that looks really nice.  I love that base.  Good job.
Micromega IA-400
Toshiba SD9200 N
Sony PS X75
Mission 775
Jamo D830 Concert 8

Offline Rockman Rock

  • Double Secret Probation!
  • **
  • Posts: 74
  • Karma: +0/-0
  • How about a taxi grab.....
Re: Bottlehead Eros
« Reply #4 on: July 08, 2015, 02:13:04 AM »
Thanks! I routed some material out between the corners for that footer look and added some spikes. Still oiling, but almost done.

« Last Edit: July 08, 2015, 02:14:42 AM by Rockman Rock »
Salk SoundScape 8's / Audio Research Reference 3 / Bottlehead Eros Phono / Krell KSA-250 / diy Lenco w/AA MG-1 arm / diy Dual Mono Buffalo III DAC / Denon 3910 I2S/DSD out mod / SB Touch 12S out mod / diy Cinemag SUT

Offline schwarcw

  • Ready For Intervention!
  • ******
  • Posts: 1625
  • Karma: +0/-0
  • No one here gets out alive!
Re: Bottlehead Eros
« Reply #5 on: July 08, 2015, 08:47:44 AM »
Looking good Rich!  How does it compare to other phono preamps that you have used?
Carl

Offline Rockman Rock

  • Double Secret Probation!
  • **
  • Posts: 74
  • Karma: +0/-0
  • How about a taxi grab.....
Re: Bottlehead Eros
« Reply #6 on: July 08, 2015, 07:37:59 PM »
Hey Carl! It compares really well! Lots of changes in the system over the years so no direct compare, except with Aaron's Reduction/Integration upgrade and that Pro-Ject phono box I have.

The Eros has incredible bass (even better than the Krell Reference SS stage), not bloated or exaggerated. Nice smooth midrange and airy, open highs. Not overly warm sounding, just right for me.  Melody sounds wonderful!
Salk SoundScape 8's / Audio Research Reference 3 / Bottlehead Eros Phono / Krell KSA-250 / diy Lenco w/AA MG-1 arm / diy Dual Mono Buffalo III DAC / Denon 3910 I2S/DSD out mod / SB Touch 12S out mod / diy Cinemag SUT

Offline schwarcw

  • Ready For Intervention!
  • ******
  • Posts: 1625
  • Karma: +0/-0
  • No one here gets out alive!
Re: Bottlehead Eros
« Reply #7 on: July 08, 2015, 10:10:39 PM »
Man that wood grain is so rich and deep.  Beautiful swirls and color!  I am spurtin wood here myself LOL! >:D
Carl

Offline Rockman Rock

  • Double Secret Probation!
  • **
  • Posts: 74
  • Karma: +0/-0
  • How about a taxi grab.....
Re: Bottlehead Eros
« Reply #8 on: July 11, 2015, 09:54:00 PM »
All fini!

Inside...



Outside pic....





Salk SoundScape 8's / Audio Research Reference 3 / Bottlehead Eros Phono / Krell KSA-250 / diy Lenco w/AA MG-1 arm / diy Dual Mono Buffalo III DAC / Denon 3910 I2S/DSD out mod / SB Touch 12S out mod / diy Cinemag SUT

Offline Sir Thrift-a-Lot

  • Ready For Intervention!
  • ******
  • Posts: 3813
  • Karma: +1/-0
Re: Bottlehead Eros
« Reply #9 on: July 11, 2015, 11:14:18 PM »
Just beautiful.   Congrats.

Offline schwarcw

  • Ready For Intervention!
  • ******
  • Posts: 1625
  • Karma: +0/-0
  • No one here gets out alive!
Re: Bottlehead Eros
« Reply #10 on: July 11, 2015, 11:21:51 PM »
WOW!  Just wow!

Do you need some tube dampers?
Carl

Offline Rockman Rock

  • Double Secret Probation!
  • **
  • Posts: 74
  • Karma: +0/-0
  • How about a taxi grab.....
Re: Bottlehead Eros
« Reply #11 on: July 24, 2015, 10:33:32 PM »
Thanks for the kind words!


Do you need some tube dampers?

Dampers? Air dampers?  ???  If yous got some extras....sure! I have some Herbies but not enough and they are kinda pricey. They have a couple O rings each on the tubes in my ARC Ref 3. Never took 'em off to hear a difference. I am making an extra wide top shelf for my VTI rack. The Eros will sit next to turntable then.

One last detail a gold plated Cardas ground lug. The paint was hard enough (baked on from heat!) to finally wax the black...

Salk SoundScape 8's / Audio Research Reference 3 / Bottlehead Eros Phono / Krell KSA-250 / diy Lenco w/AA MG-1 arm / diy Dual Mono Buffalo III DAC / Denon 3910 I2S/DSD out mod / SB Touch 12S out mod / diy Cinemag SUT