Author Topic: Stop static before static stops you  (Read 11502 times)

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Stop static before static stops you
« on: December 07, 2009, 01:11:25 PM »
I don't know if this has happened to any of you, but I'm getting static electricity shocks everytime I touch my stereo after it's been running. Is it the way I have it stacked(top to bottome... amp, integrated, cd)? I don't want to seperate my equipment if I don't have to... I could run a ground wire to a cold water line pretty easily.
Ed
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

Offline MasterBlaster

  • Administrator
  • *****
  • Posts: 1100
  • Karma: +0/-0
    • Vintage HiFi of Pittsburgh
Re: Stop static before static stops you
« Reply #1 on: December 07, 2009, 03:50:38 PM »
Ed, I don't think its the equipment holding the charge, its your body.
Have you tried to discharge yourself before touching the equipment?
I'll have to look in our lab here, I might have a disposable anti-static heel strap you could try.

One of the best ways to help control static discharge is to increase the humidity in the space.
Relative humidity of 40-50% is recommended.

Check out this article:

http://www.static-sol.com/articles/static_shocks.htm

HT: Audiocontrol Maestro M3, Sunfire 5*200,  Tannoy Mercury MX , SVS PB-12 Sub

Head-Fi: FUBAR IV Plus DAC, Grado SR225

Living Room: Dynaco ST-70 (R&R work done by NATOE), Dynaco PAS Preamp, Jamo C607 towers, MCS 6710 Turntable

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Re: Stop static before static stops you
« Reply #2 on: December 07, 2009, 04:11:48 PM »
That was helpful... I think I'm going to get some anti-static spray for my couch... I've noticed it was staticky. I have a dehumidifier set at 40% down there now, so I don't think that's the problem.. Thanks for the link...
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

Offline MasterBlaster

  • Administrator
  • *****
  • Posts: 1100
  • Karma: +0/-0
    • Vintage HiFi of Pittsburgh
Re: Stop static before static stops you
« Reply #3 on: December 07, 2009, 04:19:43 PM »
No Problem.

You definitely want to get that under control.

Fwiw, the static discharge that you don't feel can be just as dangerous.
I have been told that you only need >40  volts across 2 of the pins of
a MOSFET to damage it permanently.
« Last Edit: December 07, 2009, 04:24:52 PM by Master Blaster »
HT: Audiocontrol Maestro M3, Sunfire 5*200,  Tannoy Mercury MX , SVS PB-12 Sub

Head-Fi: FUBAR IV Plus DAC, Grado SR225

Living Room: Dynaco ST-70 (R&R work done by NATOE), Dynaco PAS Preamp, Jamo C607 towers, MCS 6710 Turntable

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Re: Stop static before static stops you
« Reply #4 on: December 07, 2009, 04:21:50 PM »
Wow! well, until I get it taken care of I'll tap a doorknob before I touch the stereo.
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

Offline MasterBlaster

  • Administrator
  • *****
  • Posts: 1100
  • Karma: +0/-0
    • Vintage HiFi of Pittsburgh
Re: Stop static before static stops you
« Reply #5 on: December 07, 2009, 04:35:26 PM »

You could try something like this near your gear to discharge yourself.

http://www.anti-staticmat.com/AntiStaticOneTouchPad.htm
HT: Audiocontrol Maestro M3, Sunfire 5*200,  Tannoy Mercury MX , SVS PB-12 Sub

Head-Fi: FUBAR IV Plus DAC, Grado SR225

Living Room: Dynaco ST-70 (R&R work done by NATOE), Dynaco PAS Preamp, Jamo C607 towers, MCS 6710 Turntable

Offline memememe

  • FNG !!!
  • *
  • Posts: 18
  • Karma: +0/-0
Re: Stop static before static stops you
« Reply #6 on: December 08, 2009, 11:27:55 AM »
 A humidifier may help the static problem, I only notice the static in the winter. I know any higher impedance stuff (mosfet, cmos). Laser doides also (cd, dvd drives) is really in danger from static.
                          Me

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Re: Stop static before static stops you
« Reply #7 on: December 08, 2009, 11:54:20 AM »
Maybe I'll up the dehumidifier to 45% and see if that does anything... The only place I've noticed it is in the basement which is the last place you'd think to have a LOW humidity issue.
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

Offline MasterBlaster

  • Administrator
  • *****
  • Posts: 1100
  • Karma: +0/-0
    • Vintage HiFi of Pittsburgh
Re: Stop static before static stops you
« Reply #8 on: December 08, 2009, 12:09:56 PM »
Do you have a humidity gauge down there?
If not, They are relatively inexpensive.
HT: Audiocontrol Maestro M3, Sunfire 5*200,  Tannoy Mercury MX , SVS PB-12 Sub

Head-Fi: FUBAR IV Plus DAC, Grado SR225

Living Room: Dynaco ST-70 (R&R work done by NATOE), Dynaco PAS Preamp, Jamo C607 towers, MCS 6710 Turntable

Offline Kingman

  • Southern Commander
  • *****
  • Posts: 3127
  • Karma: +0/-0
  • OCCD...I GOT IT BADD!!!!!!!!!
Re: Stop static before static stops you
« Reply #9 on: December 08, 2009, 08:20:55 PM »
Static Guard...if it'll keep my pants from sticking to my ass, it'll fix you too:P :P :P
IN REALITY IT ONLY MATTERS WHAT IT SOUNDS LIKE TO YOU!!!!!

Offline memememe

  • FNG !!!
  • *
  • Posts: 18
  • Karma: +0/-0
Re: Stop static before static stops you
« Reply #10 on: December 09, 2009, 10:25:35 AM »
 Yes I  agree that the basement would be the last place to expect static (no static in mine). When its colder outside there is less moisture in the indoor air cause the outside air temp won't hold water (opps).
 If you decide to ground yourself, please consider a ground strap (with built in resistor) to limit the shock hazard.
 Please no  more static guard cracks!
           Me