Repair / Help Forum > Repair / Help
Recap Resistor question
SunnyDaze:
--- Quote from: F1nut on September 07, 2012, 04:10:01 PM ---
While you have the drivers out, if the baskets are stamped steel, go ahead and add Dynamat Exteme to the spokes. This helps eliminate ringing, which will also help clean up the mid-range.
--- End quote ---
Wow. That's great advice. I never would have thought of that. Simple, but very effective.
OldiesButGoodies:
Be back in an hour - need to hit Ace for hurricane bolts and see if Bebst Buy still carries Dynamat.
F1nut:
I doubt Ace carries the Hurricane nuts and cap screws, so if they don't have them you can order them from Parts Express.
A tip for mounting the Hurricane nuts. After drilling out the holes place the nut in position on the backside of the baffle. Use one of the cap screws with a thick washer and drive the cap screw into the Hurricane nut. This will pull the nut into the hole, which is better, easier and safer than trying to hammer the nut in from the backside. Don't go crazy with the torque, you just want to seat it.
TNRabbit:
Is this what they look like?
[imghttp://home.comcast.net/~mc_audio/XR16.jpg[/img]
TNRabbit:
Sorry, bad url; here:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version