Repair / Help Forum > Repair / Help

BA Custom Adapter?

<< < (2/2)

OldiesButGoodies:

--- Quote from: MacGeek on January 25, 2017, 09:42:22 PM ---You might want to try it on  variac first

--- End quote ---

Absolutely, agree.  If you have access to a variac do that.  If not,  plug it in and run in the opposite direction, come back in no explosions or smoke follows.

DazedConfused2:
Thanks, all.

Actually, not sure about just turning it on, yet. That tall tube is a 6AQ5A, along with two 12AT7 tubes, and a 7025 (12AX7).

Can't get my head around a "stereo" gadget with what may be one low-power output tube, and not sure about firing it up without a load. Not sure what to connect load to, soooo....

Also not sure what that black/yellow wire coming out the back does. Looks like it could be a speaker connector, or it could be a remote power line.

Guess I'm just going to have to start drawing the thing out, and see if anything makes sense. That's why I was hoping to find a schematic. And, the name on it...BA Custom "Adapter"...? Adapting, what?!

BTW, I do have a Variac, signal generator, o'scope and all that. Just an intriguing oddball, here. And, it IS well-built, and using quality components. Got an old Merrill SA30 intefrated amp in the deal, with a bunch of switching boxes, and other stuff. I have no idea what that guy cobbled up, and a lot was not connected, all in a large homemade wooden enclosure. I just paid my $30, came home and kept the interesting, and got rid of the junk.

If I find anything, will post back.

Thanks,

Dazed

Sir Thrift-a-Lot:

--- Quote from: DazedConfused2 on January 26, 2017, 07:29:59 AM ---
Can't get my head around a "stereo" gadget with what may be one low-power output tube, and not sure about firing it up without a load. Not sure what to connect load to, soooo....

Also not sure what that black/yellow wire coming out the back does. Looks like it could be a speaker connector, or it could be a remote power line.

 And, the name on it...BA Custom "Adapter"...? Adapting, what?!



--- End quote ---

I am NOT an expert by any definition, so take my opinions for what they are worth.   I don't see anything that looks like an OPT or an output transistor.   I assumed at first glance that they were using the word "adapter" as a synonym for preamp.   I don't see anything that looks like it would drive a speaker, so there is no "load" to worry about.   My guess on the black/yellow is that it looks like a bulb socket.   This was probably in some sort of cabinet and that was the power on indicator at a remote spot on the face of the cabinet.   My guess is that the three RCAs are inputs for "channel A" and "channel B", and the third set is outputs to a power amp (trace back from those pots to figure out which is which).   

Perhaps this was early in the stereo era and the word "adapter" is used for this being integrated into a mono system.

MacGeek:
A few thoughts.....In the early days of stereo, definitely during the tube era, there were a number of "adaptors".  Multiplex adaptors to convert mono tuners to stereo, which this does not appear to be and stereo adaptors to allow mono preamps to function in stereo.  It might also be a head amp to allow what would then have been reel to reel tape deck heads to be connected to a high level amp/pre-amp inputs.  Early Mac preamps and others, had a tape head input, in addition to phono and high level.  It might also be a phono pre, since many very early phono inputs were designed for ceramic, high level, inputs.

Navigation

[0] Message Index

[*] Previous page