Thanks everyone. I'm lucky enough that my wife tolerates all my decorating and gear down there.
Nice job on the rack! I'm thinking about making another rack that is lower and wider like your's.
Hey, I recognize those Tektons. Nice room you have there.
All said n done the rack was about $65. Tons cheaper than buying something I'd likely have to mod to fit. The Tektons still amaze me overtime they get fired up.
Nice job. At two sheets of MDF, plus 1/4 " plywood, I imagine the shelves can hold a significant load with out sagging
I had it all together without the plywood and the bottom shelf was a bit warped, only about 1/8" on each end when I stacked them all up. Seems flat now. The entire width is 47". If I notice any more sagging I may need to add another threaded rod, I really didn't want one in the middle up front. Another option is to route a channel width wise and add a 1x2 vertically. I really, really, really don't want to take it apart again.