Vintage HiFi Audio Forum

Repair / Help Forum => Repair / Help => Topic started by: TheDude on June 03, 2014, 12:44:12 PM

Title: BSR EQ Problem
Post by: TheDude on June 03, 2014, 12:44:12 PM

I've got a BSR EQ that only works for the right channel. The left channel puts out very little sound, and the sliders do not affect sound quality at all.

But, if I press the power button quickly about 20 times, the left channel will work for a few minutes. Then, it craps out again.

Any idea what it could be?

Title: Re: BSR EQ Problem
Post by: Dicky on June 03, 2014, 03:13:21 PM

My eq-3000 did the same thing.  I never did diagnose it.  Seemed like a bad solder joint because it would work after tapping it on the side.

Title: Re: BSR EQ Problem
Post by: MacGeek on June 03, 2014, 04:11:09 PM

If it has a tape loop,  check it for proper function.  It may need cleaning.