Author Topic: Pioneer SX-828  (Read 5065 times)

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Pioneer SX-828
« on: December 10, 2009, 05:54:57 PM »
Any interest in a Pioneer SX-828 receiver? The cabinet and chassis are in great shape.
Ok, now with the bad...
-missing original volume knob, replace with different pioneer model.
-Missing dimmer button, the switch was funky to begin with so I completed the circuit to keep it "bright" at all times.
-speaker light, speaker A light, and phono light are burnt out
-Issue with a rumble in the left channel while turning the bass control. I deoxed the hell out of it and it took care of 90% of the problem, but it's still a little scratchy

Always looking for trades...

Has preamp ins &outs for expansion.

Power Output: 50 watts per channel RMS into 8 ohms.
Harmonic Distortion: Less than 0.5%
Intermodulation Distortion: Less than 0.5%


FM Sensitivity: 1.7uV
FM Capture Ratio: 1.5
FM Harmonic Distortion Mono: <0.2%
FM Harmonic Distortion Stereo: <0.4%


Dimensions: 19 x 15 x 6



Weight: 32.00 lbs
« Last Edit: December 10, 2009, 07:04:45 PM by king-edwin »
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

Offline paden501

  • Audio Geek!
  • ***
  • Posts: 294
  • Karma: +0/-0
  • Nobody Home
Re: Pioneer SX-828
« Reply #1 on: December 10, 2009, 09:12:59 PM »
I love the blue backlight on those old pioneers.  Freaking sexy.

~Matt
--- My System ---
Front L/R: Polk Audio SDA-1C w/ Modified xovers
Amp: Carver TFM-24
CD: Jolida JD100a
HTR/Pre: B&K Reference 20
Turntable:Pioneer PL-516 W/ Shure M97xe
Surrounds -Polk Audio Monitor 4As

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Re: Pioneer SX-828
« Reply #2 on: December 14, 2009, 10:37:59 AM »
Just wanted to add that I gave the amp a full test... I took it to my buddy's party and had it cranked for about 6 hours straight on all kinds of different music and it didn't flinch. There is a little bit of noise coming from the left channel though. Not sure what's causing it.
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.