Author Topic: Impromptu Geek Meeting to Listen to the Infinity RS1bs  (Read 9866 times)

OldiesButGoodies

  • Guest
Impromptu Geek Meeting to Listen to the Infinity RS1bs
« on: November 17, 2013, 09:41:09 PM »
Quick meeting to listen to the Infinity RS1bs.  Bottom line:

  • They sound like monkey ass on the bass side without the proper crossover
  • They probably need more power than the PS Audio Delta 100's 200w at 4 ohms can muster for the bass
  • The hum generated by the Grado cart combined with the Regar table is impressive
  • There is some debate about how cool/uncool the oak finish looks in 2013

So I ordered a refurb Infinity crossover (that helps the bass - allegedly) and it should be here Thursday.  The passive crossovers need recap because  the poly caps have the words "Mexico" stenciled on them ( no other scientific reason offered by Tom). 

Rev brought kick ass River Current cables that at least helped the whole thing look cooler. 

I still believe the C-19 pre is not up to par but get kicked in the balls when I insinuate that.

Mark, Ed, Big Tom, Carl et al who could not make it - hope to catch you on the next one. 

The Archer revue was great. Al brought a SACD collection of Jazz at the Pawnshop.

Hell, Papabearjew made it to the meeting and shared good news about shrinking cancer tumors - that by itself was a huge success. 

Captain Tape Deek





Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Re: Impromptu Geek Meeting to Listen to the Infinity RS1bs
« Reply #1 on: November 17, 2013, 11:11:37 PM »
I really wish I could have been there, but family came first today. Those speakers look uber impressive. I always wanted to hear a pair (or quad). Hopefully you hang onto them long enough for me to get a chance.

Super news from PBJ!!!
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

Offline Sir Thrift-a-Lot

  • Ready For Intervention!
  • ******
  • Posts: 3813
  • Karma: +1/-0
Re: Impromptu Geek Meeting to Listen to the Infinity RS1bs
« Reply #2 on: November 17, 2013, 11:11:57 PM »
Looking at the picture, I'm not sold on your speaker placement.   That could have something to do with the less than impressive performance.

Was an Oppo in use?   That menu looks very similar to the one in my 970.

Offline Sir Thrift-a-Lot

  • Ready For Intervention!
  • ******
  • Posts: 3813
  • Karma: +1/-0
Re: Impromptu Geek Meeting to Listen to the Infinity RS1bs
« Reply #3 on: November 17, 2013, 11:13:03 PM »
Yes, I forgot to say congrats to PBJ!

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Re: Impromptu Geek Meeting to Listen to the Infinity RS1bs
« Reply #4 on: November 17, 2013, 11:22:18 PM »
I need to give input on your last point, Pepe. The oak is sub zero and timeless.
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

Offline StephenWVU

  • Audio Geek!
  • ***
  • Posts: 357
  • Karma: +0/-0
Re: Impromptu Geek Meeting to Listen to the Infinity RS1bs
« Reply #5 on: November 18, 2013, 01:50:26 AM »
Nice projector!  The speakers look ok too.  :P  Once you are done fixing them up please tell when the next meeting will be.  I would love to hear them!
Speakers: Nearfield Acoustics Pipedreams Reference 18
Amplifier:
Mark Levinson ML3 (subs)
Phison A2.120SE (towers)
Preamplifier/DAC/Phono: Phison PD2SE
Server: Pi & NUC
Turntable: VPI HR-X, VdH Colibri XGW

Offline Reverend

  • Ready For Intervention!
  • ******
  • Posts: 2162
  • Karma: +0/-0
Re: Impromptu Geek Meeting to Listen to the Infinity RS1bs
« Reply #6 on: November 18, 2013, 09:23:40 AM »
I did not have the chance to sit in a sweet spot but they didn't sound like monkey ass.  I think recapping the internal crossovers will help big time.  Looking at how the Infinity external crossover is supposed to be used in conjunction with the bass columns, I think that will help tremendously.  They are supposed to be servo controlled.  I'm not 100% on explaining this but looking at the diagram, the bass out on the crossover goes back into the crossover before once again leaving like a loop. I think once that's sorted you should be able to tell if your ps audio has enough power or not.

I like the look of the wood and the size alone of each column is impressive.  Does having the grills on/off effect the sound?  I didn't see them lying around, not sure if you even have them. Maybe to stick with the 80's theme, you can use Alf or A-Team sheets to make new grills.  :laugh:  I think we gave you enough shit last night, i'll stop.

Offline thuffman03

  • Zen Master
  • *****
  • Posts: 1097
  • Karma: +0/-0
  • CarverFest Evictee
Re: Impromptu Geek Meeting to Listen to the Infinity RS1bs
« Reply #7 on: November 18, 2013, 10:50:19 AM »
I am sorry I missed the event.  It is better I did not show up and spread the cold I have been dealing with for the last week now.

Those are impressive looking speakers!  If you need power, I can bring over my Sunfire 600 next time.  1200 watts into 4 ohm should help with your bass.
Got Carver?

SunnyDaze

  • Guest
Re: Impromptu Geek Meeting to Listen to the Infinity RS1bs
« Reply #8 on: November 18, 2013, 12:13:25 PM »
Pepe, why don't you try putting the bass towers the same distance from the listening position as the mid / high towers?

You're probably losing quite a few dB based on placement alone with your current arrangement.

Offline schwarcw

  • Ready For Intervention!
  • ******
  • Posts: 1625
  • Karma: +0/-0
  • No one here gets out alive!
Re: Impromptu Geek Meeting to Listen to the Infinity RS1bs
« Reply #9 on: November 18, 2013, 12:13:58 PM »
I am sorry that I missed this event.  I had family committments to keep and I did.

Great news about PBJs medical issues!!!

Happy Birthday BJ!

As for the photo, it looks like what started as a jail break ended as group of beached whales!  >:D

Recapping crossovers always yields good results.  I've always used Sonicap on anything 20 uF or lower, Solens or Daytons on anything over 20uF.  Don't forget to replace the resistors.  Mills 10W resistors should be good.

I look forward to another opportunity to hear these classic speakers.

Regards,
Carl

bmwr75

  • Guest
Re: Impromptu Geek Meeting to Listen to the Infinity RS1bs
« Reply #10 on: November 18, 2013, 05:32:28 PM »
Nice projector! 

I don't see a projector in the two photos??

Pepe, with respect to speaker placement.......did Infinity give any guidance?

bmwr75

  • Guest
Re: Impromptu Geek Meeting to Listen to the Infinity RS1bs
« Reply #11 on: November 18, 2013, 05:41:02 PM »
Here's a link to the owner's manual (just in case you have not already found it)

http://www.davidsaudio.com/rs1b-manual.pdf

Offline papabearjew

  • Musicholic, Instigator
  • Ready For Intervention!
  • ******
  • Posts: 1054
  • Karma: +0/-0
Re: Impromptu Geek Meeting to Listen to the Infinity RS1bs
« Reply #12 on: November 18, 2013, 06:24:12 PM »
Bmr75. Projector is right above my head (I'm the handsome one)

Offline papabearjew

  • Musicholic, Instigator
  • Ready For Intervention!
  • ******
  • Posts: 1054
  • Karma: +0/-0
Re: Impromptu Geek Meeting to Listen to the Infinity RS1bs
« Reply #13 on: November 18, 2013, 06:26:15 PM »
Thanks everyone with the well wishes

bmwr75

  • Guest
Re: Impromptu Geek Meeting to Listen to the Infinity RS1bs
« Reply #14 on: November 18, 2013, 06:55:49 PM »
LOL!!

I was only seeing the left 1/2 of the pictures.  Didn't realize there was a scroll bar that would allow me to see the right 1/2.