« previous next »
Pages: [1]   Go Down

Author Topic: Entec Number Cruncher DAC w/ TG 3.0 upgrades  (Read 3269 times)

Offline non-prophet

  • Audio Connoisseur
  • ****
  • Posts: 715
  • Karma: +1/-0
  • Peace among worlds
Entec Number Cruncher DAC w/ TG 3.0 upgrades
« on: March 22, 2014, 06:17:50 PM »
I got the Prototype, serial #1.  Made in the mid 90s Designed by Damien Martin, built by Jerry Crosby (CAW) (11.94), modified from revision 1.5 (11.94), to 1.6 (6.99), to 2.0 (9.00), to 3.0 (8.04) by Bob Crump (Tg Audio). Signed by all.  There was only 75 ever made, 35 of which got upgraded to 2.0 and as far as I know, less than 5 got upgraded to 3.0.  The 3.0 rev includes: 2 power supplies one analog, one digital; both High Isolation Ei Transformers and Schottky rectifier diodes along with Nichicon Muse Caps... into shunt regulators... REL Teflon Trim Caps...Resista Resistors throughout (same as Blowtorch/Vendetta)...TG Ac wiring into Switchcraft IEC, DC wiring is TG, output signal wire is Bear Labs (same as Blowtorch), replacing almost everything on the boards but the chip set.  Amazing build quality, weighs in around 25 lbs!  This is audio art and if I get around to it I will write a review.  Here is the teaser...  it easily replaced my Melos Max1 and the CD80. 

Enjoy the pics and thank you for looking.  Nick
Logged
Duntech PCL-400 (Black Knight), KEF 105/3, Snell Type b
Aloia PST 11.1, Terra Song ss-1, Luxman c-1000, Melos MA333
Llano Phoenix CA-300, White Audio Labs A100, (2) Luxman M4000
McIntosh MA230

OldiesButGoodies

  • Guest
Re: Entec Number Cruncher DAC w/ TG 3.0 upgrades
« Reply #1 on: March 22, 2014, 06:32:36 PM »
Better than the CD80, that is something.  But also very cool that it is a rare item and it is well documented. 
Logged

Offline SHEEVS

  • FNG !!!
  • *
  • Posts: 49
  • Karma: +0/-0
Re: Entec Number Cruncher DAC w/ TG 3.0 upgrades
« Reply #2 on: March 22, 2014, 08:57:52 PM »
So when are you going to try to buy it pepe?
Logged
breaker breaker

Offline Sir Thrift-a-Lot

  • Ready For Intervention!
  • ******
  • Posts: 3813
  • Karma: +1/-0
Re: Entec Number Cruncher DAC w/ TG 3.0 upgrades
« Reply #3 on: March 22, 2014, 09:02:42 PM »
If I'm not mistaken, it doesn't do 24 bit.   If I'm not mistaken, I suspect Pepe wouldn't be in the market for it.
Logged

OldiesButGoodies

  • Guest
Re: Entec Number Cruncher DAC w/ TG 3.0 upgrades
« Reply #4 on: March 22, 2014, 10:55:20 PM »
I am using the Oppo 105 DAC (which does pretty much every format including SDS) and a Focusrite 2i2 (which is also ADC and I now use for drops and to run Room Eq Wizard).  So what do you use Sheevs?   
Logged

Offline SHEEVS

  • FNG !!!
  • *
  • Posts: 49
  • Karma: +0/-0
Re: Entec Number Cruncher DAC w/ TG 3.0 upgrades
« Reply #5 on: March 23, 2014, 08:31:12 AM »
Sorry essa this gringo doesn't have the pesos you do. My Jensen sounds good enough that because I have 1000 dollar interconnects and a gold plated plug.
Logged
breaker breaker

Offline Sir Thrift-a-Lot

  • Ready For Intervention!
  • ******
  • Posts: 3813
  • Karma: +1/-0
Re: Entec Number Cruncher DAC w/ TG 3.0 upgrades
« Reply #6 on: March 23, 2014, 08:37:24 AM »
Actually the Focusrite is quite inexpensive.   That is one of the reasons I recommend it.
Logged

Offline schwarcw

  • Ready For Intervention!
  • ******
  • Posts: 1625
  • Karma: +0/-0
  • No one here gets out alive!
Re: Entec Number Cruncher DAC w/ TG 3.0 upgrades
« Reply #7 on: March 23, 2014, 01:43:51 PM »
What an impressive looking piece of equipment!  GLWTS
Logged
Carl

Offline Sir Thrift-a-Lot

  • Ready For Intervention!
  • ******
  • Posts: 3813
  • Karma: +1/-0
Re: Entec Number Cruncher DAC w/ TG 3.0 upgrades
« Reply #8 on: March 23, 2014, 03:57:50 PM »
Is this a sale?
Logged

Offline non-prophet

  • Audio Connoisseur
  • ****
  • Posts: 715
  • Karma: +1/-0
  • Peace among worlds
Re: Entec Number Cruncher DAC w/ TG 3.0 upgrades
« Reply #9 on: March 23, 2014, 04:26:47 PM »
No, its not for sale.
Logged
Duntech PCL-400 (Black Knight), KEF 105/3, Snell Type b
Aloia PST 11.1, Terra Song ss-1, Luxman c-1000, Melos MA333
Llano Phoenix CA-300, White Audio Labs A100, (2) Luxman M4000
McIntosh MA230

Offline schwarcw

  • Ready For Intervention!
  • ******
  • Posts: 1625
  • Karma: +0/-0
  • No one here gets out alive!
Re: Entec Number Cruncher DAC w/ TG 3.0 upgrades
« Reply #10 on: March 23, 2014, 10:04:51 PM »
Sorry Nick!  LOL!  I thought you were posting it to sell.
Logged
Carl

Offline Reverend

  • Ready For Intervention!
  • ******
  • Posts: 2162
  • Karma: +0/-0
Re: Entec Number Cruncher DAC w/ TG 3.0 upgrades
« Reply #11 on: March 24, 2014, 10:15:28 AM »
Nice pickup Nick.  Better sounding then a CD-80?  That's pretty impressive.
Logged

Offline BrianT

  • F'n Brit Asshole!!!
  • *******
  • Posts: 291
  • Karma: +0/-1
Re: Entec Number Cruncher DAC w/ TG 3.0 upgrades
« Reply #12 on: March 24, 2014, 05:50:15 PM »
Hey Nick

I wonder how it is going to stack up to the Melos Max , that shipped today.
Should be at the shop by Thursday.
Hope you really like it.

Brian
Logged
Vinnie Rossi L2SI integrated amp
Takatsuki 300B tubes
2 x Carver 275 Mono Block
Audience Front Row Bi wire Speaker Cables
Audience Front Row USB Cable
Audience Front Row RCA Cables
VPI Classic TurnTable (blk)
c/w Transfiguration Phoenix Cartridge
Auralic G2 server
B&W 803D3 (black)
Pages: [1]   Go Up
« previous next »