« previous next »
Pages: [1]   Go Down

Author Topic: BSR EQ Problem  (Read 1964 times)

Offline TheDude

  • FNG !!!
  • *
  • Posts: 1
  • Karma: +0/-0
BSR EQ Problem
« on: June 03, 2014, 12:44:12 PM »
I've got a BSR EQ that only works for the right channel. The left channel puts out very little sound, and the sliders do not affect sound quality at all.

But, if I press the power button quickly about 20 times, the left channel will work for a few minutes. Then, it craps out again.

Any idea what it could be?
Logged

Dicky

  • Guest
Re: BSR EQ Problem
« Reply #1 on: June 03, 2014, 03:13:21 PM »
My eq-3000 did the same thing.  I never did diagnose it.  Seemed like a bad solder joint because it would work after tapping it on the side.
Logged

Offline MacGeek

  • Ready For Intervention!
  • ******
  • Posts: 1464
  • Karma: +1/-0
Re: BSR EQ Problem
« Reply #2 on: June 03, 2014, 04:11:09 PM »
If it has a tape loop,  check it for proper function.  It may need cleaning.
Logged
Mac stuff, Sony HDR-F1HD AM/FM/HD tuner, Denon DRS 810 cassette, Denon CDR-W1500 CD recorder, Music Hall MMF-9 w/B&O MMC2, B & O 4002 w/B & O 20 CL, Revox A-77
Pages: [1]   Go Up
« previous next »