Audio Discussion > DIY

Dayton 10" DIY Sub Build

(1/2) > >>

OldiesButGoodies:
Decided to give a Partsexpress subwoofer bundle a try - for 200 bucks and some sweat equity not much to lose and a lot to gain from trying to smooth out the dips in response from 20 to 90 hertz in the cave.   For your entertainment some pictures of the build and results.

The cabinet comes like this - precut by some computer-controlled device that makes extremely precise cuts:

IMG_1247 by Jose Sifontes, on Flickr

Goes together like a jigsaw puzzle:

Untitled by Jose Sifontes, on Flickr

Untitled by Jose Sifontes, on Flickr

IMG_1275 by Jose Sifontes, on Flickr

IMG_1280 by Jose Sifontes, on Flickr

I chose to veneer it,  not necessary - the finish is smooth enough that you can use textured paint to do it.

IMG_1282 by Jose Sifontes, on Flickr

IMG_1314 by Jose Sifontes, on Flickr

IMG_1329 by Jose Sifontes, on Flickr

(the pic shows I need to do some minor stain touch up in the veneer-to-baffle area)
IMG_1346 by Jose Sifontes, on Flickr

The combined response, collaborating with my Rhytmik FV15HP,  met my needs (crazy suck-outs at 30 and 80 hertz gone):

limiterOnDaytonRythmik80Hz by Jose Sifontes, on Flickr

The Dayton sub runs out of power at 25 hz (it is a sealed box) but in-room it gets help from the side wall to drop lower.  On the upside it is very precise,  tight.  Building these things is, of course, a blast.   The Gorilla glue is a big help compared to regular wood glue,  recommended. 

I am driving the sub with one channel from an iNuke 3000DSP,  using a couple of PEQ filters to smooth things out in that channel using DSP.   The other channel is driving Dayton bass shakers that I turn on for movies.

Regards,

Pepe

OldiesButGoodies:
Forgot to add specifics about the 10" driver - a Dayton Ultimax 10" dual voice coil sub:

IMG_1249 by Jose Sifontes, on Flickr

IMG_1248 by Jose Sifontes, on Flickr

IMG_1320 by Jose Sifontes, on Flickr

IMG_1321 by Jose Sifontes, on Flickr

The voice coils are wired in series to get the impedance up to an amp-friendly 4 ohms:

IMG_1325 by Jose Sifontes, on Flickr

scorpio333:
That woofer looks very beefy. Always reading good things about the Dayton speakers, but you never know if it's coming from someone thinks Sounddesign or Aiwa sound great or a more serious listener like yourself.

 

RuralTom:
Nice looking work, Pepe, glad it helped smooth the room out as well.

AdamG:
Those Ultimax are killer subwoofer drivers. I had designed a huge box, 4'x8'x12" for a PAIR of the 15" Ultimax. They sub was used as a couch platform for second-row seating. It was phenomenal. Nice build!

Navigation

[0] Message Index

[#] Next page