Author Topic: New office setup  (Read 9669 times)

Offline paden501

  • Audio Geek!
  • ***
  • Posts: 294
  • Karma: +0/-0
  • Nobody Home
New office setup
« on: February 22, 2010, 12:52:00 PM »
It's nothing terribly impressive, but here's my 'new' office setup. 

It consists of a Yamaha CD-X3 CD player (courtesy of Tom), a Home-made 'Chu-Moy' headphone amplifier and eventually a pair of Shure SRH-440 Cans (ordering next week).

I know it's nothing special, but for just a couple of bucks in parts I can now listen to music at work without driving my cubicle neighbors nuts!

Here are some photos.

The Yami:


The Chu Moy:




As you can see, I built the cMoy into the aluminum case that my Shure M97xe phono cartridge came in.  My original plan was to build it into an altoids tin (like so many others) but because I upgraded the power supply and input capacitor from the original spec, it would no longer fit into an Altoids tin.  The Shure case works nicely though and will allow me to add a wall outlet plug for power later.

~Matt
--- My System ---
Front L/R: Polk Audio SDA-1C w/ Modified xovers
Amp: Carver TFM-24
CD: Jolida JD100a
HTR/Pre: B&K Reference 20
Turntable:Pioneer PL-516 W/ Shure M97xe
Surrounds -Polk Audio Monitor 4As

BB3

  • Guest
Re: New office setup
« Reply #1 on: February 22, 2010, 01:04:40 PM »
Matt ;D, Have I Ever Told You How Smart You Are ? I Wouldn't Even Know The First Place To Begin To Put Something Together Like That.......

Don't Mind Me, I'm Just Blown Away With The Skills And Knowledge That You Matt, And Just About Everyone Here For That Matter, Possess.

I Wish That I Was So Fortunate....... :'(------BILL(BB3)

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Re: New office setup
« Reply #2 on: February 22, 2010, 01:06:46 PM »
That is pretty nice. It's going to be cool to listen to something that YOU built.
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

Offline paden501

  • Audio Geek!
  • ***
  • Posts: 294
  • Karma: +0/-0
  • Nobody Home
Re: New office setup
« Reply #3 on: February 22, 2010, 01:52:24 PM »
Thanks for the comments guys.

Bill, the cMoy was actually pretty straight-forward to build. www.tangentsoft.net has a really good step-by-step tutorial that I referenced.  The thing even gives you the part numbers from Digikey to order and everything.   All I really had to do was drill the holes in the case and solder the parts where the diagram showed me to. 

I'm sure that everyone here is capable of putting this one together.
~Matt
--- My System ---
Front L/R: Polk Audio SDA-1C w/ Modified xovers
Amp: Carver TFM-24
CD: Jolida JD100a
HTR/Pre: B&K Reference 20
Turntable:Pioneer PL-516 W/ Shure M97xe
Surrounds -Polk Audio Monitor 4As

Offline Falcon

  • Polk Killer
  • ****
  • Posts: 1131
  • Karma: +0/-0
Re: New office setup
« Reply #4 on: February 22, 2010, 03:14:09 PM »
Nice job!!  I was thinking of doing something similar, please let me know how it sounds...

Mike

Offline paden501

  • Audio Geek!
  • ***
  • Posts: 294
  • Karma: +0/-0
  • Nobody Home
Re: New office setup
« Reply #5 on: February 22, 2010, 03:56:30 PM »
Mike.

Give me a few days to listen to this setup before I get a sound review on it.  There are a lot of variables at play here and I honestly don't have much experience with headphone sound, so I need to keep my mind open for a while before I make an impression.  I know that a major thing holding this setup back right now are my cheap headphones.  I'm currently using an old pair of Sony MRD-G42 phones, which are of the cheap around the neck variety.  hopefully my Shure's arrive later this week or early next week.

What I have noticed so far is that SOURCE MATTERS A LOT in headphones, which is exactly why I brought the CD-X3 into play.  Last week I was just using my Lenovo laptop's cd tray and windows media player as a source, and it WAS NOT CUTTING IT!  Everything below 80hz was horribly distorted with or without the amp installed... it was just bad.  The bass-line during the intro to John Mayer's 'Clarity' (from the album 'Heavier Things') was like tin cans full of rocks being rattled.

With the CD-X3 in play, the distortion goes away, but the bass presence and visceral impact gets lost a little bit.... is it the amp, the phones or the source?  At this point I have no idea.

~Matt
--- My System ---
Front L/R: Polk Audio SDA-1C w/ Modified xovers
Amp: Carver TFM-24
CD: Jolida JD100a
HTR/Pre: B&K Reference 20
Turntable:Pioneer PL-516 W/ Shure M97xe
Surrounds -Polk Audio Monitor 4As

Offline Kingman

  • Southern Commander
  • *****
  • Posts: 3127
  • Karma: +0/-0
  • OCCD...I GOT IT BADD!!!!!!!!!
Re: New office setup
« Reply #6 on: February 22, 2010, 04:07:36 PM »
Hard enough for me to hook up interconnects! Kudos to you!!!!
« Last Edit: February 22, 2010, 06:25:32 PM by OCCD »
IN REALITY IT ONLY MATTERS WHAT IT SOUNDS LIKE TO YOU!!!!!

Offline thuffman03

  • Zen Master
  • *****
  • Posts: 1097
  • Karma: +0/-0
  • CarverFest Evictee
Re: New office setup
« Reply #7 on: February 22, 2010, 04:34:31 PM »
Very cool paden!  Hope it sounds good!
Got Carver?

Offline OCCD

  • Woof
  • Ready For Intervention!
  • ******
  • Posts: 1741
  • Karma: +0/-0
  • glub glub glub
    • Vintage HiFi of Pittsburgh
Re: New office setup
« Reply #8 on: February 22, 2010, 06:26:06 PM »
Nice job!!! ;D
Do you want ants? Because THAT'S HOW YOU GET ANTS!

Offline BrianT

  • F'n Brit Asshole!!!
  • *******
  • Posts: 291
  • Karma: +0/-1
Re: New office setup
« Reply #9 on: February 22, 2010, 06:37:36 PM »

Matt.

You did a nice job on the head phone amp.

Brian
Vinnie Rossi L2SI integrated amp
Takatsuki 300B tubes
2 x Carver 275 Mono Block
Audience Front Row Bi wire Speaker Cables
Audience Front Row USB Cable
Audience Front Row RCA Cables
VPI Classic TurnTable (blk)
c/w Transfiguration Phoenix Cartridge
Auralic G2 server
B&W 803D3 (black)

Offline mikey813

  • Audio Connoisseur
  • ****
  • Posts: 538
  • Karma: +0/-0
Re: New office setup
« Reply #10 on: February 22, 2010, 07:44:55 PM »
Great job Matt. Looks pretty cool. ;D ;D
True Image CM-2500, Terra Song SS-1, Denon       DCD-1520, Sony CA8es, Kef K140, Definitive Technology DR-7
youtube-
http://www.youtube.com/user/Callof813

Offline sean283

  • Double Secret Probation!
  • **
  • Posts: 68
  • Karma: +0/-0
  • Forever FNG!!
Re: New office setup
« Reply #11 on: February 22, 2010, 08:26:22 PM »
Cube life just became more tolerable..
more tolerable for you that is.

Nice.



« Last Edit: February 22, 2010, 08:42:05 PM by sean283 »
SS system 1 - Conrad Johnson PV-10AL  Carver TFM-25 Carver DTL-200 MKII Carver C9 River Current RC8- Yamaha NS-690II Yamaha NS-670
SS system 2 - Sansui 9090DB Snell EII  Tascam CD-RW700
Tube system - Akai X-150D H.H. Scott 99-D (2)  Sony MDS-JE510 Bozak B-302A