« previous next »
Pages: 1 2 [3]   Go Down

Author Topic: Ribbon popping  (Read 14746 times)

Offline OCCD

  • Woof
  • Ready For Intervention!
  • ******
  • Posts: 1741
  • Karma: +0/-0
  • glub glub glub
    • Vintage HiFi of Pittsburgh
Re: Ribbon popping
« Reply #30 on: July 07, 2011, 12:52:38 AM »
The dark side has been good to me.
Logged
Do you want ants? Because THAT'S HOW YOU GET ANTS!

Offline schwarcw

  • Ready For Intervention!
  • ******
  • Posts: 1625
  • Karma: +0/-0
  • No one here gets out alive!
Re: Ribbon popping
« Reply #31 on: July 07, 2011, 01:03:37 AM »
Quote from: Reverend on July 05, 2011, 08:36:49 AM
I haven't heard popping in my ribbons before but I wouldn't doubt that 250wpc might be too little.  My amazing's are 8ohm and seem fine with a 300x2 or 760x (380wpc).  So clean you don't realize how loud they are until you try to talk to the person next to you and can't hear your own voice.  :P

If the SPL level is over 110 in your listening position, you are doing permanent damage to your ears.  Turn it down!
Logged
Carl

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Re: Ribbon popping
« Reply #32 on: July 08, 2011, 11:13:40 PM »
Carl, let me know in graille if I'm shaking your windows in Monroeville  :P :P :laugh: :laugh:

here's the new LR set-up for the time being...
Logged
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Re: Ribbon popping
« Reply #33 on: July 08, 2011, 11:18:48 PM »
I'm starting to slowly discover that the wonder of ribbons is the soundstage... Super smooth sound lacking in detail. Where they lack in detail they make up in pinpoint imaging and super broad soundstage. Does that pretty much sum it up?
Logged
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

Offline TNRabbit

  • Audio Geek!
  • ***
  • Posts: 474
  • Karma: +0/-0
  • WTF are you looking at?
Re: Ribbon popping
« Reply #34 on: July 09, 2011, 01:39:57 AM »
Lacking in detail??


Not my experience....

The rest....yeah!
Logged
TNRabbit


Carver SD/A-360 CDP feeding  Benchmark DAC-1
Sunfire Theater Grand-IV Processor/Sunfire Cinema Seven Signature Amp
Ashly XR-1001 & Rane PEQ-15s biamping AL-IIIs

Offline mbskeam

  • Double Secret Probation!
  • **
  • Posts: 111
  • Karma: +0/-0
  • oh yeah baby
Re: Ribbon popping
« Reply #35 on: July 09, 2011, 10:00:45 AM »
Quote
I'm starting to slowly discover that the wonder of ribbons is the soundstage... Super smooth sound lacking in detail

do these speaks have the 3 pots on them?
looking at your pic, spread them apart, less tilt about  2/3deg back

yes ribbons have a different sound, but once you listen to them for a while, you will like them....
but, beware. when you go back and listen to cone speakers you will think,...
these kinda sound like crap..... :D :D :D

welcome to the DARK SIDE....... :laugh: :laugh: :laugh: :laugh:
Logged
mbskeam

http://photobucket.com/albums/a96/mbskeam/

life is like flowers hanging from RaZer wire

Anders

  • Guest
Re: Ribbon popping
« Reply #36 on: July 09, 2011, 11:21:02 AM »
Ribbons and Electrostatics have much lower distortion than conventional speakers.
It is measurable.
Logged

Offline Reverend

  • Ready For Intervention!
  • ******
  • Posts: 2162
  • Karma: +0/-0
Re: Ribbon popping
« Reply #37 on: July 09, 2011, 02:52:21 PM »
Wow schwarcw, I haven't had anyone tell me to turn it down since I was little.  Thank you for your concern of my ears.   :laugh:
Logged

Offline OCCD

  • Woof
  • Ready For Intervention!
  • ******
  • Posts: 1741
  • Karma: +0/-0
  • glub glub glub
    • Vintage HiFi of Pittsburgh
Re: Ribbon popping
« Reply #38 on: July 09, 2011, 04:06:51 PM »
I live on the dark side! :P
Logged
Do you want ants? Because THAT'S HOW YOU GET ANTS!

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Re: Ribbon popping
« Reply #39 on: July 09, 2011, 04:12:25 PM »
Quote from: mbskeam on July 09, 2011, 10:00:45 AM
Quote
I'm starting to slowly discover that the wonder of ribbons is the soundstage... Super smooth sound lacking in detail

do these speaks have the 3 pots on them?
looking at your pic, spread them apart, less tilt about  2/3deg back

yes ribbons have a different sound, but once you listen to them for a while, you will like them....
but, beware. when you go back and listen to cone speakers you will think,...
these kinda sound like crap..... :D :D :D

welcome to the DARK SIDE....... :laugh: :laugh: :laugh: :laugh:

No, they don't have the pots. What do you mean by 2/3 deg back?
Logged
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

Offline Kingman

  • Southern Commander
  • *****
  • Posts: 3127
  • Karma: +0/-0
  • OCCD...I GOT IT BADD!!!!!!!!!
Re: Ribbon popping
« Reply #40 on: July 09, 2011, 07:07:59 PM »
Lacking in detail??


Not my experience....

The rest....yeah!
Please explain???? Lack of detail???  ???
Logged
IN REALITY IT ONLY MATTERS WHAT IT SOUNDS LIKE TO YOU!!!!!

Anders

  • Guest
Re: Ribbon popping
« Reply #41 on: July 09, 2011, 07:14:41 PM »
come to the dark side....
we have cookies.
Logged

Offline mbskeam

  • Double Secret Probation!
  • **
  • Posts: 111
  • Karma: +0/-0
  • oh yeah baby
Re: Ribbon popping
« Reply #42 on: July 09, 2011, 07:50:44 PM »
Quote
What do you mean by 2/3 deg back?

tilt back when facing them,  the top of the Speaker will be a bit farther back....
Logged
mbskeam

http://photobucket.com/albums/a96/mbskeam/

life is like flowers hanging from RaZer wire
Pages: 1 2 [3]   Go Up
« previous next »