Eleven Horns or Jeffery Jackson horns and walnut bass bins for sale

[tinpan]

Jefferey Jackson (of Eleven Horns) turned wood Le Cleac'h horns, 1500 Hz recommended crossover point. Homemade aluminum stands with exotic wood bass. BIC 1" drivers currently mounted. The horns sell for $900 new, the Bic drivers sell for $200 new..I am looking for $500 for these


These horns feature the Le Cleach curve and you would not believe the imaging. Hands down my favorite


The horns on the walnut veneer bass bins

Walnut bass bins with 12" kappalite neo LF drivers, internal 1500Hz 2nd order crossover wired with 47 labs wire and obligatto oil caps. This was my buddy's "learn to veneer project". I will sell them for quite a bit less than the cost of the eminence drivers and crossover parts, consider the cabinets free.... I am looking for $400 for the bass bins


The bass bins also have lpads installed, here they are with the AH horns which are interchangeable



Another nice small 2 way horn system that doesn't take up a lot of room

[MacGeek]

Beautiful!  Good luck with your sale.

[Sir Thrift-a-Lot]

 

[tinpan]

sold

[tinpan]

BJ, here's as example of an in expensive horn system you can build:

B&C DE250-8 1" Polyimide Horn Driver 8 Ohm 2/3-Bolt   
Part # 294-605   
$110.15


B&C ME10 1" Hyperbolic Cosine Horn 90x60 2-Bolt
Part # 294-618   


Parts Express Speaker L-Pad Attenuator 100W Mono 3/8" Shaft 8 Ohm
Part # 260-262   
$12.95

Eminence PXB2:800 2-Way Speaker Crossover Board 800 Hz
Part # 290-632   
$49.99
   
PA Knock-Down Trapezoid Plywood Speaker Cabinet for 15" Driver
Part # 245-326   
$94.90

Eminence Delta-15LFA 15" Low Frequency Driver
Part # 290-417   
$99.99

You would need everything times 2. These are the parts express bass bins in this picture with the Emminence and BC drivers. You could use these horns until you find a nicer pair. I do have a pair of Smith's horns that would fit as well.


Just giving you some ideas

[bearjew]

Thanks, this will give me something to research to occupy my time.

[tinpan]

Another option is this

Tang Band W8-1808 8" Neodymium Full Range Driver
Brand:Tang Band| Model: W8-1808

http://www.ebay.com/itm/Sousahorn-Le-Cleach-160-hz-horn-pair-/291328583432?pt=US_Speaker_Parts_Components&hash=item43d4896708
Though you can get these from Gary Gill for $600 new plus shipping.

I have heard this driver on the Sousa horn and with a bass bin it is a really nice set up. It will play a lot louder than the Lowther set up I use. The Lowther drivers are $3k a pair the Tang bands are $400.

[papabearjew]

Thanks, this will give me something to research to occupy my time.

He means while he's taking a dump

[OldiesButGoodies]