Author Topic: Denon's or Sunfire?????  (Read 10872 times)

Offline Falcon

  • Polk Killer
  • ****
  • Posts: 1131
  • Karma: +0/-0
Denon's or Sunfire?????
« on: September 29, 2010, 01:27:44 PM »
 If you could have either one, which would you choose, and why.
    I have two Denon POA-6600A mono block power amps, I have wanted for a long time to get a Sunfire 300x2. Now I have the chance to get the Sunfire, but can not have both. :( :(  So, now it is decision time.
         The amps will probably be powering the B&W 802's.
   So, help me out guy's.   Which one would you choose??

Offline thuffman03

  • Zen Master
  • *****
  • Posts: 1097
  • Karma: +0/-0
  • CarverFest Evictee
Re: Denon's or Sunfire?????
« Reply #1 on: September 29, 2010, 01:40:15 PM »
You should know my answer, Sunfire.

I do believe that both would power the B&W's just fine but there is a feature on the Sunfire that you might like.

There are two sets of binding posts on the back.  One is Current and the other is Voltage.  The Current will give you a tubish sound while the Voltage is normal.  It is like the T mod on a Carver M500T.
Got Carver?

Offline Reverend

  • Ready For Intervention!
  • ******
  • Posts: 2162
  • Karma: +0/-0
Re: Denon's or Sunfire?????
« Reply #2 on: September 29, 2010, 01:48:46 PM »

Offline OCCD

  • Woof
  • Ready For Intervention!
  • ******
  • Posts: 1741
  • Karma: +0/-0
  • glub glub glub
    • Vintage HiFi of Pittsburgh
Re: Denon's or Sunfire?????
« Reply #3 on: September 29, 2010, 01:55:05 PM »
SUNFIRE! Do I really need to explain? :o
Do you want ants? Because THAT'S HOW YOU GET ANTS!

Offline FrankieD

  • FNG !!!
  • *
  • Posts: 30
  • Karma: +0/-0
Re: Denon's or Sunfire?????
« Reply #4 on: September 29, 2010, 02:54:33 PM »
I have very little experience with Denon, only a Denon receiver & it was fine.

Given the above I would still go with Sunfire ina minute !

Not only because of the dual output (Tube/ss) but also because of the technology. The tracking downconverter Bob Carver invented is truly revolutionary.

I have powered my system with several different Carver amps & as much as 500 WPC. I now use a 400 WPC Sunfire (7400).

It is a bottomless bucket of clean power & never even gets warm.

My .02

Offline Kingman

  • Southern Commander
  • *****
  • Posts: 3127
  • Karma: +0/-0
  • OCCD...I GOT IT BADD!!!!!!!!!
Re: Denon's or Sunfire?????
« Reply #5 on: September 29, 2010, 03:28:22 PM »
SOUNDDESIGN...my best friend in high school had one with built in turntable and....shitttttttttttttttt....SUNFIRE!!!!! Draws less current, gives more output!!!  8) 8) 8)
IN REALITY IT ONLY MATTERS WHAT IT SOUNDS LIKE TO YOU!!!!!

OldiesButGoodies

  • Guest
Re: Denon's or Sunfire?????
« Reply #6 on: September 29, 2010, 04:28:16 PM »
that one is easy,  Sunfire. 

Offline schwarcw

  • Ready For Intervention!
  • ******
  • Posts: 1625
  • Karma: +0/-0
  • No one here gets out alive!
Re: Denon's or Sunfire?????
« Reply #7 on: September 29, 2010, 07:46:12 PM »
Krell KSA-300 20 amp draw, weighing in at around 150 lbs this legendary piece is a man's amp.  Dead quiet, very dynamic with a frightening amount of power and headroom.

Carl
« Last Edit: September 29, 2010, 10:29:13 PM by schwarcw »
Carl

SunnyDaze

  • Guest
Re: Denon's or Sunfire?????
« Reply #8 on: September 29, 2010, 09:34:16 PM »


I do believe that both would power the B&W's just fine but there is a feature on the Sunfire that you might like.



So Mikey got the 802's eh? Awesome.

Offline F1nut

  • Ball Buster
  • *****
  • Posts: 544
  • Karma: +0/-0
Re: Denon's or Sunfire?????
« Reply #9 on: September 30, 2010, 03:41:43 AM »
Did someone mention B&W's?

  'Political Correctness'.........defined

"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."
 

Offline Falcon

  • Polk Killer
  • ****
  • Posts: 1131
  • Karma: +0/-0
Re: Denon's or Sunfire?????
« Reply #10 on: September 30, 2010, 05:32:50 AM »
Wow, that sure is a purty picture. All I can find says +or- 2db from 55hz to 20khz.
  Where did you find that? And what series speaker is that for.

SunnyDaze

  • Guest
Re: Denon's or Sunfire?????
« Reply #11 on: September 30, 2010, 09:40:03 AM »
Just buck up and snag a pair of Levinson 33's.

Offline Falcon

  • Polk Killer
  • ****
  • Posts: 1131
  • Karma: +0/-0
Re: Denon's or Sunfire?????
« Reply #12 on: September 30, 2010, 02:44:01 PM »
Did someone mention B&W's?



   Is that  from the 805 system?  Pretty ugly, from a very expensive system.
  These ones I have for now are the 802 series 80, They are pretty good.. Not the best, but for the price I paid, hard to beat... ;D
  I like these ones as they are not ported like the newer versions. I think these have a much more natural sounding bottom end. And as far as I hear, a pretty smooth response from top to bottom.
   I think these will be needing a tweeter, so if anyone knows where to find a B&W TS-26 tweeter, please let me know.

Offline OCCD

  • Woof
  • Ready For Intervention!
  • ******
  • Posts: 1741
  • Karma: +0/-0
  • glub glub glub
    • Vintage HiFi of Pittsburgh
Re: Denon's or Sunfire?????
« Reply #13 on: September 30, 2010, 04:32:19 PM »
You killed a tweeter already... Polk Killer?
Do you want ants? Because THAT'S HOW YOU GET ANTS!

Offline Falcon

  • Polk Killer
  • ****
  • Posts: 1131
  • Karma: +0/-0
Re: Denon's or Sunfire?????
« Reply #14 on: September 30, 2010, 09:09:28 PM »
NOT ME !!!!  Some jag off who could not keep his fingers off of it... at your last meeting!!!!