Author Topic: Carver AL-III need ribbon work and B&K preamp.  (Read 7580 times)

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Carver AL-III need ribbon work and B&K preamp.
« on: October 13, 2013, 09:57:38 AM »
I need to get these out of the house. The ribbons are buzzing. They aren't torn, and Tom thinks he can fix them without replacing the kapton. I had planned on fixing them, but I haven't gotten around to it, and they are just taking up space and getting dusty. Will consider trading for a reel to reel deck or sell for $250.

The preamp is an AVP2000. It is the stereo version with dual zone capabilities, 2 sets of preamp outputs per zone, balanced outputs, and a remote. The rubber feet have become soft and sticky and need to be replaced. I would also consider trading this for a RtR or selling it for $150.

Ed
412-607-9threeOh8
« Last Edit: October 13, 2013, 10:01:18 AM by Slim-Shaddy »
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

OldiesButGoodies

  • Guest
Re: Carver AL-III need ribbon work and B&K preamp.
« Reply #1 on: October 13, 2013, 09:17:43 PM »
Slim - will take the ALIIIs.  Please deliver to Tom for repair and hot rodding.  Send me your Paypal info.  Will send as friend.

Tom:  Please fix and then hot rod these babies for me. 

Thanks

Pepe


OldiesButGoodies

  • Guest
Re: Carver AL-III need ribbon work and B&K preamp.
« Reply #2 on: October 13, 2013, 09:29:15 PM »
Well will take them pending confirmation from Tom that he can fix them.  I hope that is cool. 

Pepe

Offline schwarcw

  • Ready For Intervention!
  • ******
  • Posts: 1625
  • Karma: +0/-0
  • No one here gets out alive!
Re: Carver AL-III need ribbon work and B&K preamp.
« Reply #3 on: October 13, 2013, 10:16:14 PM »
I miss my AL-IIIs!   :'(  Sniff!


Carl

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Re: Carver AL-III need ribbon work and B&K preamp.
« Reply #4 on: October 13, 2013, 10:25:49 PM »
Cool, Pepe... Let me know. When I get a hand lugging them to my car I'll get them there. Wait for your confirmation.
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

OldiesButGoodies

  • Guest
Re: Carver AL-III need ribbon work and B&K preamp.
« Reply #5 on: October 14, 2013, 12:04:26 AM »
Will confirm soon - need to call the old man tomorrow and see what he could do to fix them. Thanks Slim!

OldiesButGoodies

  • Guest
Re: Carver AL-III need ribbon work and B&K preamp.
« Reply #6 on: October 19, 2013, 09:13:10 AM »
Ed:

I am going to pass on these as my wife is harassing me about speakers that are as tall as people.  I think this is a great deal for someone willing to invest in the restore.   Good luck on the sale!

The Mexican Cassetist

Offline MacGeek

  • Ready For Intervention!
  • ******
  • Posts: 1465
  • Karma: +1/-0
Re: Carver AL-III need ribbon work and B&K preamp.
« Reply #7 on: October 19, 2013, 01:27:15 PM »
Pepe,  I thought your Hi-Fi room was immune from domestic influence
Mac stuff, Sony HDR-F1HD AM/FM/HD tuner, Denon DRS 810 cassette, Denon CDR-W1500 CD recorder, Music Hall MMF-9 w/B&O MMC2, B & O 4002 w/B & O 20 CL, Revox A-77

Offline hewlew1

  • Double Secret Probation!
  • **
  • Posts: 92
  • Karma: +0/-0
Re: Carver AL-III need ribbon work and B&K preamp.
« Reply #8 on: October 19, 2013, 08:30:12 PM »
Are they in oak or are they black? Thanks Harry

OldiesButGoodies

  • Guest
Re: Carver AL-III need ribbon work and B&K preamp.
« Reply #9 on: October 19, 2013, 08:37:46 PM »
MacG:  strictly speaking the basement is my territory.  In practical terms,  we aim to maintain diplomatic relations as warm as possible with all members of the household.   >:D

Offline Slim-Shaddy

  • CARVER KILLER!!!
  • ******
  • Posts: 1555
  • Karma: +0/-0
  • Tubes are for boobs
    • This is Bullshit
Re: Carver AL-III need ribbon work and B&K preamp.
« Reply #10 on: October 20, 2013, 01:45:40 AM »
Oak.. I think OCCD is taking them. I will post a sold sign when the deed is done.
I am confident that an SL-1200 is capable of outperforming turntables of much higher expense with minor modification.

OldiesButGoodies

  • Guest
Re: Carver AL-III need ribbon work and B&K preamp.
« Reply #11 on: October 20, 2013, 08:41:48 AM »
Slim -  you better get the wood type right,  F1nut will set you straight otherwise.  Rev and I have a poor track record on that.

Offline MacGeek

  • Ready For Intervention!
  • ******
  • Posts: 1465
  • Karma: +1/-0
Re: Carver AL-III need ribbon work and B&K preamp.
« Reply #12 on: October 20, 2013, 10:09:54 AM »
Cap'n-I understand.  My problem is space and it is rather strictly defined.  When I put the Tandberg 10x on top of my equipment rack, it was a no go.  Now I'll need to tear down the entire set up and reconfigure the component placement.  Oh well, everything needs a good cleaning, and a couple of pieces need a tweak or two anyway.
Mac stuff, Sony HDR-F1HD AM/FM/HD tuner, Denon DRS 810 cassette, Denon CDR-W1500 CD recorder, Music Hall MMF-9 w/B&O MMC2, B & O 4002 w/B & O 20 CL, Revox A-77

Offline Rockman Rock

  • Double Secret Probation!
  • **
  • Posts: 74
  • Karma: +0/-0
  • How about a taxi grab.....
Re: Carver AL-III need ribbon work and B&K preamp.
« Reply #13 on: November 07, 2013, 12:39:46 AM »
I miss my AL-IIIs!   :'(  Sniff!



Carl, I'm not sure if I even have that pic anymore...lol A pair of AL-III + off to left, some SRS 2's.
Salk SoundScape 8's / Audio Research Reference 3 / Bottlehead Eros Phono / Krell KSA-250 / diy Lenco w/AA MG-1 arm / diy Dual Mono Buffalo III DAC / Denon 3910 I2S/DSD out mod / SB Touch 12S out mod / diy Cinemag SUT

Offline hewlew1

  • Double Secret Probation!
  • **
  • Posts: 92
  • Karma: +0/-0
Re: Carver AL-III need ribbon work and B&K preamp.
« Reply #14 on: November 07, 2013, 12:51:13 AM »
So did Tom buy these ? I am interested