Author Topic: Phono Ground - Marantz 2225  (Read 5890 times)

Offline LGLDSR73

  • Double Secret Probation!
  • **
  • Posts: 62
  • Karma: +0/-0
    • LymanD.Com
Phono Ground - Marantz 2225
« on: May 19, 2010, 08:17:59 PM »
This has taken me buy surprise. Where's the ground for the Phono stage on the Marantz 2225?

There's a chassis ground for the 2225 but I'm not seeing a separate ground for the phono...

Thanks,

Lyman
---
Lyman

Offline Reverend

  • Ready For Intervention!
  • ******
  • Posts: 2162
  • Karma: +0/-0
Re: Phono Ground - Marantz 2225
« Reply #1 on: May 19, 2010, 08:29:33 PM »
You can use that ground if you're getting hum from your cartridge.  Use the existing ground or run a wire from your turntable chassis to the ground on the back of the 2225.
« Last Edit: May 19, 2010, 08:31:42 PM by RevAmish »

Offline LGLDSR73

  • Double Secret Probation!
  • **
  • Posts: 62
  • Karma: +0/-0
    • LymanD.Com
Re: Phono Ground - Marantz 2225
« Reply #2 on: May 19, 2010, 08:54:27 PM »
You can use that ground if you're getting hum from your cartridge.  Use the existing ground or run a wire from your turntable chassis to the ground on the back of the 2225.
Thanks. I thought that grounding lug on the back of the receiver was for the Receiver itself, no?
---
Lyman

Offline Reverend

  • Ready For Intervention!
  • ******
  • Posts: 2162
  • Karma: +0/-0
Re: Phono Ground - Marantz 2225
« Reply #3 on: May 19, 2010, 09:00:19 PM »
A ground is a ground.  I used it on my 2230 to ground my turntable and the receiver itself when I didn't have a power conditioner.

Offline LGLDSR73

  • Double Secret Probation!
  • **
  • Posts: 62
  • Karma: +0/-0
    • LymanD.Com
Re: Phono Ground - Marantz 2225
« Reply #4 on: May 19, 2010, 10:25:40 PM »
A ground is a ground.  I used it on my 2230 to ground my turntable and the receiver itself when I didn't have a power conditioner.
Yeah, the light finally came on when I thought about it. Albeit dimly, but it did come on  ;D
---
Lyman